TEA1102T

TEA1102T - Fast charge ICs for NiCd, NiMH, SLA and LiIon

GENERAL DESCRIPTION

The TEA1102x are fast charge ICs which are able fast

charge NiCd and NiMH, SLA and Lilon batteries.

The main fast charge termination for NiCd and NiMH

batteries are ∆T/∆t and peak voltage detection, both of

which are well proven techniques. The TEA1102x

automatically switches over from ∆T/∆t to peak voltage

detection if the thermistor fails or is not present. The ∆T/∆t

detection sensitivity is temperature dependent, thus

avoiding false charge termination. Three charge states

can be distinguished; fast, top-off and trickle.

Charging Lilon and SLA batteries is completely different.

When the batteries reach their maximum voltage

(adjustable), the TEA1102x switches over from current

regulation to voltage regulation. After a defined time

period, which is dependent on battery capacity and charge

current, charge is terminated. Due to small self discharge

rates of Lilon and SLA batteries, trickle charge can be

omitted.

Several LEDs, as well as a buzzer, can be connected to

the TEA1102x for indicating battery insertion, charge

states, battery full condition and protection mode.

The TEA1102x are contained in a 20-pin package and are

manufactured in a BiCMOS process, essentially for

integrating the complex mix of requirements in a single

chip solution. Only a few external low cost components are

required in order to build a state of the art charger. 

FEATURES

• Safe and fast charging of Nickel Cadmium (NiCd),

Nickel Metal Hydride (NiMH), Lithium Ion (LiIon), and

Sealed Lead Acid (SLA) batteries

• Three charge states for NiCd or NiMH; fast, top-off and

trickle or voltage regulation (optional)

• Two charge states for LiIon or SLA; current and voltage

limited

• Adjustable fast charge current [0.5CA to 5CA nominal

(CA = Capacity Amperes)]

• DC top-off and pulsating trickle charge current (NiCd

and NiMH)

• Temperature dependent ∆T/∆t battery full detection

• Automatic switch-over to accurate peak voltage

detection (−1⁄

4%) if no NTC is applied

• Possibility to use both ∆T/∆t and peak voltage detection

as main fast charge termination

• Support of inhibit during all charging states

• Manual refresh with regulated adjustable discharge

current (NiCd and NiMH)

• Voltage regulation in the event of no battery

• Support of battery voltage based charge indication and

buzzer signalling at battery insertion, end of refresh and

at full detection

• Single, dual and separate LED outputs for indication of

charge status state

• Minimum and maximum temperature protection

• Time-out protection

• Short-circuit battery voltage protection

• Can be applied with few low-cost external components.

由于客户采购批量与样品的价格不同，网上无法统一注明，请您把采购型号通过邮件或客服QQ：2850151585 发给我们，也可以拨打明佳达国内销售部电话：0755-83957301，由客服人员为您报价；有时元件厂商价格稍许变动，本公司未能及时调整，如您觉得售价稍高，请与我们说明并适当议价，感谢支持!

MJD is a corporation which engaged in agency electronic components. MJD Through seventeen years unrimitting efforts,  aspire to provide our customers with world-leading products and service. Now already became a one of the most famous electronic components distributor in China.

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 PAYMENTS:

We support the following payment methods:

 1. Paypal

 2. Western Union 

 3. Bank Wire (TT)

 4. MoneyGram

Shipping:

1. MJD needs about 3 BUSINESS DAY to handle the order after received payment. after receiving your payment. Otherwise, we will state it in the invoice in advance.

2. MJD can Ship via your shipping account (DHL / FEDEX / UPS / TNT or others) as your instruction. Or Ship via our shipping account (We have a very good relationship with DHL and FEDEX with very special freight).

3. Regarding the declared value on the package for customs clearance, we are pleased to follow

your wishes, just feel free to inform us when ordering.

4. Any import fees or charges are the buyer's responsibility.

REFUNDS & RETURN:

We offer a warranty on all items that we sold. Item will be tested before ship,it will be in good condition,if there are some problems with the item,feel free to contact us.Please Email us to notify a defective item. Unless otherwise specified, this item comes with 30 days warranty from the shipment date.

You must contact us before returning any product. All returns must be made within 30 days from this shipment date.Return must be in new condition(the SAME CONDITION as it was sent to you)

Because of wholesale price is different from sample price, our website can not state. Please send your required part number via email Sales@hkmjd.com or skype id mjdccm898 to us.  As well as welcome you call us : 0755-83957301  We will send offer for you;  Sometimes manufacturer's price is unstable, so we don't adjust price in time. if you feel price is a little high for you, just feel free to contact us for consultation. Thank you for your support ！